<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>合泰社区论坛 - 8Bit 通用MCU单片机</title>
    <link>http://www.holteksupport.com/forum-41-1.html</link>
    <description>Latest 20 threads of 8Bit 通用MCU单片机</description>
    <copyright>Copyright(C) 合泰社区论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Fri, 29 May 2026 19:36:09 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.holteksupport.com/static/image/common/logo_88_31.gif</url>
      <title>合泰社区论坛</title>
      <link>http://www.holteksupport.com/</link>
    </image>
    <item>
      <title>HT67F2362A替代HT67F2362应用问题</title>
      <link>http://www.holteksupport.com/thread-2457-1-1.html</link>
      <description><![CDATA[HT67F2362生产的程序，使用HT67F2362A替代，在线仿真初始化将RSTC设置为0xAA后，单步执行几条指令后立马复位（HT67F2362不会）？烧录出来发现5V供电一直复位，低于4V供电后正常，这是什么原因，不是可以完全替代吗？]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>al200210</author>
      <pubDate>Fri, 11 Jul 2025 09:00:35 +0000</pubDate>
    </item>
    <item>
      <title>为什么我的HT-IDE3000里面的RAM窗口显示的数据都是@</title>
      <link>http://www.holteksupport.com/thread-461-1-1.html</link>
      <description><![CDATA[我的HT-IDE3000里面的RAM窗口显示的数据都是@@@@@@@@@@
我看视频里面的可以显示数据啊！！]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>xieqinfu</author>
      <pubDate>Tue, 20 Aug 2024 13:32:10 +0000</pubDate>
    </item>
    <item>
      <title>合泰的IDE软件，怎么添加文件夹分类</title>
      <link>http://www.holteksupport.com/thread-428-1-1.html</link>
      <description><![CDATA[如题，合泰的IDE软件，怎么添加文件夹分类？类似于KEILL把文件分类那种]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>itcs</author>
      <pubDate>Mon, 05 Jun 2023 04:15:52 +0000</pubDate>
    </item>
    <item>
      <title>BH66F5242库在哪里下载</title>
      <link>http://www.holteksupport.com/thread-414-1-1.html</link>
      <description><![CDATA[第一次使用合泰单片机，请问哪里能下载BH66F5242库]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>QWWZ908</author>
      <pubDate>Mon, 01 Aug 2022 12:20:41 +0000</pubDate>
    </item>
    <item>
      <title>合泰c语言教程有吗</title>
      <link>http://www.holteksupport.com/thread-407-1-1.html</link>
      <description><![CDATA[谁有合泰c语言的教程啊，求助！！]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>gzl10000</author>
      <pubDate>Sat, 09 Jul 2022 05:53:58 +0000</pubDate>
    </item>
    <item>
      <title>合泰单片机快速入门教程与应用指南在哪里免费下载</title>
      <link>http://www.holteksupport.com/thread-406-1-1.html</link>
      <description><![CDATA[合泰单片机快速入门教程与应用指南在哪里能免费下载呢]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>gzl10000</author>
      <pubDate>Fri, 08 Jul 2022 15:13:23 +0000</pubDate>
    </item>
    <item>
      <title>这个合泰C语言和C51有哪些区别</title>
      <link>http://www.holteksupport.com/thread-404-1-1.html</link>
      <description><![CDATA[这个合泰C语言和C51有哪些区别，请大神告知。]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>gzl10000</author>
      <pubDate>Wed, 06 Jul 2022 07:31:15 +0000</pubDate>
    </item>
    <item>
      <title>求HT66F0185资料</title>
      <link>http://www.holteksupport.com/thread-312-1-1.html</link>
      <description><![CDATA[求HT66F0185资料]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>flowerC</author>
      <pubDate>Sun, 10 Apr 2022 03:35:39 +0000</pubDate>
    </item>
    <item>
      <title>谁有合泰单片机的入门资料</title>
      <link>http://www.holteksupport.com/thread-311-1-1.html</link>
      <description><![CDATA[谁有合泰单片机的入门资料]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>flowerC</author>
      <pubDate>Sun, 10 Apr 2022 03:30:52 +0000</pubDate>
    </item>
    <item>
      <title>C Compiler  使用手册</title>
      <link>http://www.holteksupport.com/thread-310-1-1.html</link>
      <description><![CDATA[C Compiler 使用手册]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>flowerC</author>
      <pubDate>Sun, 10 Apr 2022 03:28:09 +0000</pubDate>
    </item>
    <item>
      <title>新手上路，请教，HT66V0185芯片，外部中断问题</title>
      <link>http://www.holteksupport.com/thread-301-1-1.html</link>
      <description><![CDATA[外部中断0程序如下，但烧录后LED灯没反应。看了数据手册也没看出什么原因导致的
void main()
{
]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>张家小子</author>
      <pubDate>Fri, 04 Mar 2022 06:07:46 +0000</pubDate>
    </item>
    <item>
      <title>合泰单片机大小端问题</title>
      <link>http://www.holteksupport.com/thread-288-1-1.html</link>
      <description><![CDATA[问题如题目。在做24位ADC采样数据处理时，大小端的存储方式对程序处理尤其重要。查过资料，才知道51单片机是大端存储，但是合泰单片机没有查到，不知道合泰单片机是大端还是小端？]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>linlh</author>
      <pubDate>Sun, 12 Dec 2021 04:28:41 +0000</pubDate>
    </item>
    <item>
      <title>合泰单片机可以直接驱动4位数码管吗？</title>
      <link>http://www.holteksupport.com/thread-287-1-1.html</link>
      <description><![CDATA[打算对合泰单片机尝个鲜，想使用BH67F5245做个数显表头，数码管0.36寸，共阴或者共阳暂时没有确定。计划不使用三极管之类的器件，想用最精简的办法：通过IO口直接连接或者串电阻到数码管来驱动，不知道是否可行？之前见过一款产品上这么搞过，使用台湾省紘康的单片机， ...]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>linlh</author>
      <pubDate>Fri, 10 Dec 2021 07:56:31 +0000</pubDate>
    </item>
    <item>
      <title>合泰8位单片机的FLASH容量的疑问</title>
      <link>http://www.holteksupport.com/thread-285-1-1.html</link>
      <description><![CDATA[今天问的这个问题，可能会比较LOW。因为之前一直使用的是51系列的单片机，现在看合泰的单片机，在FLASH容量方面是这样表述的：● Flash 程序存储器：4K×16。所以就很疑惑，51系列里都是8K，16K或者32K的表述，而合泰的4K×16怎么理解，相当于或者等同于51系列里多大容 ...]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>linlh</author>
      <pubDate>Thu, 11 Nov 2021 02:59:46 +0000</pubDate>
    </item>
    <item>
      <title>合泰单片机常见的问题解答</title>
      <link>http://www.holteksupport.com/thread-279-1-1.html</link>
      <description><![CDATA[Q：开发环境如何选择MCU的高速振荡器?A：菜单栏-&gt;工具-&gt;配置选项-&gt;HIRC frequencty selection选择系统振荡器。

Q：当我使用触摸包进行开发时为何在开发环境改变高速振荡器不起作用?A：触摸包程序有调整配置，优先级大于开发环境配置，用户在TKS_GLOBE_VARIES.INC文件 ...]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>admin</author>
      <pubDate>Mon, 11 Oct 2021 01:17:15 +0000</pubDate>
    </item>
    <item>
      <title>合泰额温枪方案HT67F2742</title>
      <link>http://www.holteksupport.com/thread-210-1-1.html</link>
      <description><![CDATA[请教合泰额温枪的一个问题：合泰代码里面传感器的曲线参数是封装在库里面的，这个参数怎样换成我自己采购的热电堆参数？另外额温枪怎样校准？]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>mike</author>
      <pubDate>Tue, 02 Feb 2021 07:58:50 +0000</pubDate>
    </item>
    <item>
      <title>有哪位大神帮我看一下我下面代码哪里有出错的！！HT66F2370串口通信</title>
      <link>http://www.holteksupport.com/thread-199-1-1.html</link>
      <description><![CDATA[发送 0x5A 0XA1 0XA2 0XA3 0XA4 0XA5这组数据给RX，但是接收不到，有哪位大神帮忙看一下指出错误


uint8_t rdata_count;    //数组下标
uint8_t rdata_buf[30];  //接受数组

void Send_Char(uint8_t s)
{
]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>董力鸣</author>
      <pubDate>Thu, 05 Nov 2020 07:54:45 +0000</pubDate>
    </item>
    <item>
      <title>HT66F2390範例CODE</title>
      <link>http://www.holteksupport.com/thread-198-1-1.html</link>
      <description><![CDATA[HT66F2390範例CODE]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>twanonymous</author>
      <pubDate>Wed, 04 Nov 2020 12:23:41 +0000</pubDate>
    </item>
    <item>
      <title>HT-IED3000一定要连接HT-ICE才能生成OTP文件吗</title>
      <link>http://www.holteksupport.com/thread-158-1-1.html</link>
      <description><![CDATA[要用HT46R47做个小东西，编译、软件仿真没找到OTP文件。是不是一定要连接HT－ICE才能生成OTP文件]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>西域风</author>
      <pubDate>Sat, 25 Apr 2020 06:17:49 +0000</pubDate>
    </item>
    <item>
      <title>合泰单片机常见问题汇总Q&amp;A</title>
      <link>http://www.holteksupport.com/thread-148-1-1.html</link>
      <description><![CDATA[Q：开发环境如何选择MCU的高速振荡器?A：菜单栏-&gt;工具-&gt;配置选项-&gt;HIRC frequencty selection选择系统振荡器。

Q：当我使用触摸包进行开发时为何在开发环境改变高速振荡器不起作用?A：触摸包程序有调整配置，优先级大于开发环境配置，用户在TKS_GLOBE_VARIES.INC文件 ...]]></description>
      <category>8Bit 通用MCU单片机</category>
      <author>admin</author>
      <pubDate>Wed, 04 Mar 2020 11:33:37 +0000</pubDate>
    </item>
  </channel>
</rss>